Wi-Fi 7 and Wi-Fi 6 for every space.
Six access points on a common management platform — indoor ceilings, an in-room hospitality wall-plate, and hardened outdoor units.
Indoor ceiling
Flagship NB-AP744-C
The flagship. Twelve spatial streams across 2.4, 5 and 6 GHz for up to 18.7 Gbps of tri-band capacity, 320 MHz channels, Multi-Link Operation and a true 10G uplink.
18.67 Gbps
Aggregate PHY rate1
NB-AP722-C
Tri-band Wi-Fi 7 for mainstream enterprise ceilings — 2×2 across 2.4, 5 and 6 GHz for up to 9.33 Gbps, with 320 MHz channels, MLO and a 10G SFP+ / 2.5G uplink.
9.334 Gbps
Aggregate PHY rate1
NB-AP644-C
Enterprise-class Wi-Fi 6 for the ceiling — 4×4:4 MU-MIMO on both bands, up to 3.55 Gbps of aggregate capacity and a 2.5G PoE+ uplink that keeps wired backhaul ahead of the air.
3.55 Gbps
Aggregate PHY rate1
Outdoor
NB-AP722-H
A hardened outdoor AP with 2.4 GHz plus two independent 5 GHz radios for up to 6.45 Gbps — 160 MHz channels, MLO, six external N-type omni antennas and a 10G SFP+ / 2.5G 802.3bt PoE uplink.
6.452 Gbps
Aggregate PHY rate1
Flagship NB-AP744-H
The outdoor flagship. IP67-rated, 4×4 across 2.4, 5 and 6 GHz for up to 18.67 Gbps, with 320 MHz channels, MLO, eight external 6 dBi omni antennas and a 10G 802.3bt PoE / 10G SFP+ uplink.
18.67 Gbps
Aggregate PHY rate1
Figures are aggregate theoretical PHY (link) rates — the sum of the per-band PHY rates — not user-achievable throughput. Actual data throughput and coverage vary with the environment, network design, placement and client devices.
Compare
The whole line, side by side.
| NB-AP744-C | NB-AP722-C | NB-AP722-WP | NB-AP644-C | NB-AP722-H | NB-AP744-H | |
|---|---|---|---|---|---|---|
| Wi-Fi | Wi-Fi 7 | Wi-Fi 7 | Wi-Fi 7 | Wi-Fi 6 | Wi-Fi 7 | Wi-Fi 7 |
| Placement | Indoor ceiling | Indoor ceiling | Wall-plate | Indoor ceiling | Outdoor | Outdoor |
| Bands | Tri-band · 2.4 / 5 / 6 GHz | Tri-band · 2.4 / 5 / 6 GHz | Dual-band · 2.4 / 5 GHz | Dual-band · 2.4 / 5 GHz | 2.4 GHz + dual 5 GHz | Tri-band · 2.4 / 5 / 6 GHz |
| Streams | 4×4 (12-stream) | 2×2 (6-stream) | 2×2 | 4×4 : 4 | 2×2 per radio | 4×4 |
| Aggregate PHY rate¹ | 18.67 Gbps | 9.334 Gbps | 3.57 Gbps | 3.55 Gbps | 6.452 Gbps | 18.67 Gbps |
| Wired uplink | 10G PoE · 2.5G · 10G SFP+ | 2.5G PoE · 10G SFP+ | 2.5G PoE+ · PoE-out · 3× LAN | 2.5G PoE+ | 2.5G 802.3bt PoE · 10G SFP+ | 10G 802.3bt PoE · 2.5G · 10G SFP+ |
| PoE | 802.3bt | 802.3bt | 802.3at | 802.3at | 802.3bt | 802.3bt |
Figures are aggregate theoretical PHY (link) rates — the sum of the per-band PHY rates — not user-achievable throughput. Actual data throughput and coverage vary with the environment, network design, placement and client devices.
In Malaysia, the 6 GHz band is limited to 5925–6425 MHz for indoor, low-power use per MCMC regulations; channels above 6425 MHz are disabled and not for use in Malaysia.
Power accessories
PoE injectors for single-AP deployments where a PoE switch is not present.
NB-INJ-60W
60 W PoE injector for single-AP power where a PoE switch is not present.
NB-INJ-90W
90 W PoE injector for 802.3bt / 10G-class access points.
Managed as one
Every access point runs standalone, or under Newbridge Controller and CMC — cloud or on-premise — with zero-touch provisioning and rolling firmware upgrades.
Not sure which model fits?
Tell us the site — density, indoor or outdoor, budget — and we'll recommend and quote.